A Beginners Guide To Floors

Learning About Epoxy Garage Flooring for Your Home Use Epoxy can be used as paint for concrete such as your flooring because of its long-lasting and tough coating. Epoxy has the ability of resisting grease and oil and many other substances that can ruin an ordinary paint. It is available in a variety of colors and easy to clean and maintain, keeping your garage floor attractive and sparkling clean for years. If you’re planning to set up such kind of flooring for your garage, you have to remember that this project is very challenging, usually highly advised to be handled by professionals, and proper concrete preparation is very important because not all concrete floors can hold the coating. Like any other paint job, the overall success of this type of garage flooring depends on proper preparation, so the entire first day will be spent scrubbing, vacuuming, cleaning and degreasing the floor, removing oil spots, etching it with a muriatic acid and rinsing. Day two is intended to fill cracks and application of the first coat of epoxy, followed by a second coat of the third day. Though this garage work does not require many special tools, experts recommend to rent a power floor scrubber with a stiff brush attachment for an easier job, successful and better result. Use brush for better scrubbing than using pads, but you can use pads if brush is not available. Once you’re finished cleaning and scrubbing the floor, you must sprinkle it with water and acid solution by pouring 12 ounces from a bottle of 32% muriatic acid into one gallon of water in a plastic sprinkler can, sprinkling it evenly over a 10 x 10 feet area. For testing the moisture content of your garage floor, tape a plastic bag to the garage floor and leave it for at least twenty-four hours, and if it is dry underneath once you check it, then you can begin applying an epoxy coating. Do not apply epoxy coating if you see moisture under the plastic because the water pressure will break the bond. It is important to analyze the weather and the condition of the floor before applying the epoxy coating. An epoxy floor paint is a tough resin comes in two separate parts that can be mixed together just before applying them, that can be divided into three types 100% solids, solvent based and water based, and it’s important to decide what type of paint you’ll be using. The 100% solid type should be left to professionals because it is difficult to handle as it hardens rapidly, and this type does not contain solvents that evaporate. A solvent-based epoxy typically contains 40% to 60% solids that can adhere and penetrate well, making it the top choice for professionals. A water-based epoxy have two parts that are mixed before applying it to your concrete, containing 40% to 60% solids but no hazardous solvent fumes. For more information, feel free to check our website.A Brief History of Floors

Lessons Learned About Flooring

Leave a Reply

Your email address will not be published. Required fields are marked *